Molly's Sketchbook: Herringbone Handkerchiefs

These hand stitched handkerchiefs are as pretty as can be and also so simple to make. What a lovely thing to pull out of your pocket! -- Molly
Herringbone Handkerchiefs: Materials

- 1 yard of Yuwa's Feather Garden (I used pink). This sheer fabric is AMAZING! If you are anything like me you are going to want to buy it in every color...
- 4 colors of Valdani Pearl Cotton Embroidery Thread. I used an assortment from my huge stash but the colors, Bark, Pink, Burnt Orange, and Spring would work beautifully with the pink colorway of the fabric.
- Embroidery Needle
- Water Soluble Fabric Marker
- 8 safety pins
Herringbone Handkerchiefs: Cut + Prepare Fabric
Wash, dry and press your fabric.
Cut four 12-inch squares from the Feather Garden fabric. (It is possible to cut six 12-inch squares out of a yard but you will have to be really exact. I find it much more realistic to cut four. If you'd like some advice on using a rotary cutter, be sure to visit our rotary cutting tutorial.)
Iron a 1/4-inch fold at the top and bottom of the square. Then do the same for the left and right sides as pictured above.
Repeat this ironing and folding once more. There will no longer be any raw edges showing.

Instead of using regular pins to keep the seam in place, which would be painful during the embroidery process, secure the corners and centers of each side with safety pins.
Herringbone Handkerchiefs: Stitching
Prepare thread
Thread the embroidery needle with a 20-inch length of embroidery thread. Tie a simple, one loop knot leaving at least a 3-inch tail. You will hide this tail later.
Put your needle through the bottom edge of the hem, from the wrong side, coming out on the right side.
Pull your thread through. Above is a picture of the long tail on the wrong side. Again, you will hide this tail later.
The Herringbone Stitch
The herringbone stitch is worked from left to right, however the needle is often stitching from right to left. Even though that may seem a little counterintuitive it's quite simple once you get the hang of it. Remember to take your safety pins out as you come to them.
Turn your work around so the right side is facing you.
Push the tip of your needle through your fabric approximately 1/8-inch from the top of the hem and 1/4-inch to the RIGHT of where your needle came out in the last step.
Take a stitch that is approximately 1/8-inch long horizontally to the LEFT. Pull your thread through, but do not pull it tight. Since you are not using an embroidery hoop it's up to you to keep the tension even.
Next push your needle through the fabric approximately 1/8-inch from the bottom edge of the hem and about 1/4-inch to the RIGHT from where you last pulled out your needle. Then, poke the tip of your needle 1/8-inch horizontally to the LEFT of where you stuck it in. Pull through the thread through, again make sure it's not too tight.
And now just start again from the beginning.
Above is a picture of the herringbone hem after a few stitches.

And here you can see how the herringbone stitch is catching both the top and the bottom of the folded hem.
Below is a demonstration of the herringbone stitch on graph paper. The odd numbers represent where the needle comes out and an even numbers represent where the needle enters:

Oh and here is what the back should look like:
Herringbone Handkerchiefs: Corners + Finishing
Corners
Make sure to sew through all the layers to secure your corners.
And start a new left to right row at the beginning of each side.
Finishing
On the back side of the hem make a small knot right at the point where your thread comes out of the fabric.
Pull the needle through the bottom edge of the hem, making sure it doesn't poke through to the front of the handkerchief. Snip your thread.
Now find the tail you left at the beginning of the row and thread it. Pull your thread through the bottom of the hem and snip it, just like you did for the end of the row.
Once you've hemmed and finished all the sides the back should look neat and tidy, like this:
And the front should look like this:
Herringbone Handkerchiefs: Cross Stitch Monogram

The cross stitch monogram on the corner of the handkerchief is entirely optional, but it's a very easy way to personalize something. I put an "M" on my handkerchiefs but you could certainly try any letter or number you please.
Cross Stitch
Below is a brief lesson on how to do very simple cross stitch. I am by no means a cross stitch expert so this may not the official way to do things, but works for me.
On the graph paper below, the odd numbers represent where your needle comes out and the even numbers represent where it goes in:
Here is how to cross stitch if you're making a row that's going up:


Repeat this in the next square above until you have a row of your desired length.
The back should be two neat vertical rows, no crosses.
And here's how to do rows that go down:
The Monogram
Draw a 1-inch letter at the corner of your handkerchief with a water soluble fabric marker.

Cross stitch the letter using the pen mark as a guide. It's a lot harder to cross stitch on something that doesn't have a grid so take your time placing each stitch. To cross stitch diagonally just follow the instructions for either the up or down row (depending on the direction you're going) but place your #1 point diagonally from your #4 point instead of above or below. Make sure not to pull too tight.
Once you're done with your monogram carefully weave in the ends in the back. Spray with water and iron to get rid of the blue marker.
All done!



