Search The Purl Bee
Sign up for our newsletter!

Idea Center
Follow The Purl Bee
« Laura's Loop: Knit Elbow Patches | Main | Easy Pullover for Babies, Toddlers + Kids. Now in Three New Sizes! »
Sunday
Jan052014

Joelle's Diagonal Pinstripe Scarf

I've written several books with the words "Last-Minute" in the title, so you can imagine that I occasionally relish the exact opposite! Especially in the depths of winter, I love to sink my teeth into a project whose gratification may not be immediate but whose pleasure is deeply satisfying. My Diagonal Pinstripe Scarf is just that!

Not only does this scarf represent a month or two of on-again-off-again knitting, but its pinstripes actually serve as a record of my production. I wanted the stripes to be syncopated and unexpected, but have you ever tried to be intentionally random? It's hard! So instead, I devised a rule that would ensure arbitrary line-placement: If I put the project down for more than eight hours I would start the next knitting session with a stripe. I figured my available knitting time was the most random thing I could chronicle!

For a three-season decandently soft scarf, I used our very own Line Weight. It creates such luminosity with its fine halo of downy merino, and in Heirloom White with fine lines of Dark Loam, the effect is like a graphite drawing on cotton rag paper, loose and mysterious.


For long-term knitting, I almost always choose garter stitch. I love its rhythmic certainty, its simplicity and lofty warmth. And knit on the bias, garter stitch has a fresh, graphic impact that satisfies my inner aesthete! I hope you enjoy the mesmerizing cadence of my Diagonal Pinstripe Scarf as much as I did! -Joelle

 

The Materials

  • Main Color: 3 skeins; I used Heirloom White.
  • Stripe Color: 1 skein; I used Dark Loam
  • US size #3, 24-inch circular needles, or size required to achieve gauge (Note: I used a circular needle in order to have enough length to accomodate all 120 stitches; this project is NOT knit in the round).

The Pattern

Gauge

7 1/2 stitches = 1 inch in garter stitch

Finished Measurements

Approximately 11-inches wide x 74-inches long

Pattern Note

Do all slip stitches knitwise with the yarn in back.

Begin

INCREASE SECTION

Note: There are no stripes in the increase or decrease sections of the scarf.

With Main Color, cast on 3 stitches.

Set-up Row: Slip 1, knit into front and back (kfb), k1. (4 stitches)

Increase Row: Slip 1, knit to last 2 stitches, kfb, k1. (1 stitch increased)

Repeat Increase Row until there are 120 stitches.

MAIN STITCH PATTERN

Row 1 (right side): Slip 1, k2tog, knit to last 2 stitches, kfb, k1.

Note: If you want, place a removable stitch marker (or safety pin or scrap of yarn) on the right side of the work to help you keep track of where you are in the pattern.

Row 2 (wrong side): Slip 1, knit to end of row.

STRIPE PATTERN

At the end of a wrong side row, cut Main Color yarn.

Stripe Row 1 (right side): Switching to Stripe Color, slip 1, k2tog, pick up tail end of Stripe Color and k9 using both working yarn and tail, drop tail, knit to last 2 stitches, kfb, k1.

Cut the Stripe Color yarn.

Note: When working each of the next 2 rows be sure to knit the nine double stranded stitches as only one stitch each.  

Stripe Row 2 (wrong side): Switching to Main Color, slip 1, k1, pick up tail end of Main Color and k9 using both working yarn and tail, drop tail, knit to end of row.

Stripe Row 3: Slip 1, k2tog, pick up tail end of Main Color from 2 rows below and k9 using both working yarn and tail, drop tail, knit to last 2 stitches, kfb, k1.

Stripe Row 4: Slip 1, knit to end.

Trim tail ends that have been knit in. Carefully weave in tail of Stripe Color from the end of Stripe Row 1 through the stripe stitches. For the most invisible results use Duplicate Stitch for garter stitch. Trim tail end.

Continue with Rows 1 and 2 of the Main Stitch Pattern, working the Main Stitch Pattern and Stripe Row as desired, until work measures approximately 74 inches from the cast on to the top left corner (with right side facing you).

DECREASE SECTION

Decrease Row: Slip 1, k2tog, knit to end of row. (1 stitch decreased)

Repeat Decrease Row until 2 stitches remain. Cut yarn and thread it through the remaining stitches.

Weave in beginning and end tails.

Reader Comments (67)

Hi Judy-

The first slip stitch at the beginning of the stripe section is done exactly the same way as the slipped stitches in the rest of the pattern. You simply slip the first stitch on your left needle (which will be in the main color yarn) to the right needle, knitwise. Then you start using the Stripe yarn to do the k2tog and onward. Make sure you are slipping the stitches gently and not pulling them out of shape.

Any unevenness on the edge is caused by loose stitches when you join a new color but in the end they pretty much even out.

If the slipping is really messing you up you can also simply knit the first stitch with the stripe color if it looks better to you, the pattern will still work.

I hope this helps!

Molly
January 23, 2014 | Registered Commenterpurl bee
If I wanted to make this in PS Worsted Twist, how many skeins would I need for the MC and the stripe? What size needle would you recommend?

Thanks!

Josephine
January 23, 2014 | Unregistered CommenterJosephine
Hi Josephine-

This is just an estimate but we think you'll need 3 skeins of the Heirloom White (or whatever main color you choose) and 1 skein of the Loam. We'd recommend trying a size 8 needle.

Thank you, and please let us know how it comes out!

Best-

Molly
January 23, 2014 | Registered Commenterpurl bee
Thank you, Molly! I will give this a go :-)
January 24, 2014 | Unregistered CommenterJudy
Hello Molly,

The way you randomly placed the dark lines as a time record of your knitting activity is lovely. I am totally obsessed with this scarf since I saw it yesterday!

A dear friend pointed out that the idea reminds her of the Sunday stone calendar found in a mine in the North of England.
http://www.oum.ox.ac.uk/favouritethings/index.php?selector=Kennedy

I am posting this link because I thought you may find that of interest!

Many thanks for sharing all your lovely ideas on the Purl Bee website!
February 13, 2014 | Unregistered CommenterThe hemmed-in kittiwake
I'm about 7 rows into the Main Stitch Pattern and have developed what can only be described as a corner on one side of my work. Is this intended? None of your pictures seem to show that section.
April 2, 2014 | Unregistered CommenterSusan
Hi Susan-

Yes, you should have the first corner, which was created when you did the increase section, and then the second corner, which should be opposite of the first one. The length between these two corners is the bottom edge of the scarf.

It sounds like you're doing it correctly so if this isn't making sense just keep going and I think you'll soon see what I mean.

Thank you for writing in!

Molly
April 3, 2014 | Registered Commenterpurl bee
I am wondering about how much of the CC you had left over?
April 9, 2014 | Unregistered Commentersacha
Hi Sacha-

Joelle estimates that she had approximately 370 yards left over of the stripe color.

Thanks!

Molly
April 14, 2014 | Registered Commenterpurl bee
I'm obviously doing something wrong because when, in the set-up row, I slip the stitch knitwise with the yarn in back and then kfb, I keep dropping the slipped stitch. Help, please!
April 23, 2014 | Unregistered CommenterRemi
Hi Remi-

I'm so sorry to hear you're having this problem! The slipped stitch shouldn't be involved in the kfb. In other words, you are doing the kfb into the second stitch, not the slipped stitch. You might want to review our kfb video here: http://www.purlbee.com/the-purl-bee/2014/1/5/joelles-diagonal-pinstripe-scarf.html

You might also be knitting too tightly which could pull the slip stitched off. If that's the case you should to try using a needle in a larger size and knitting a bit looser.

I hope this helps! Thanks for writing in!

Molly
April 24, 2014 | Registered Commenterpurl bee
I'm almost finished with this scarf in ballet pink with a gray stripe and have really enjoyed this project. I think I need block it to even out the stitching, but I'm afraid of stretching out the garter stitch. How do you recommend blocking this scarf? Thanks!
May 4, 2014 | Unregistered CommenterSarah
Hi Sarah-

We recommend lightly blocking it as described in this tutorial:

http://www.purlbee.com/knitting-tutorials-finishing/2006/11/13/blocking.html

Your colors sound lovely! Thanks for your question!

Molly
May 4, 2014 | Registered Commenterpurl bee
First thank you for sharing this beautiful pattern. Can you clarify the decrease section for me.

Do I start the decrease section on the wrong side i.e. the longest will be the start of rhe row, and I can't picture decreasing each row. To me I would not get a square edge as the begining,
May 7, 2014 | Unregistered CommenterBarbara
Hi Barbara-

It doesn't matter if you are on the right or wrong side when you begin the decrease section. Since you are decreasing at the beginning of every row both wrong-side and right-side rows will decrease at an equal rate and form a 90-degree angle to mirror the increase section. It may be hard to visualize but once you get going I think you'll see the shape taking form and it should all make sense.

Thanks so much for your question!

Molly
May 9, 2014 | Registered Commenterpurl bee
Is this especially feminine when it's complete? Do you think that it would work for a man if I picked darker colors like blues and greens?
July 15, 2014 | Unregistered CommenterMaggie
Hi Magiie-

It's hard to say since every man (and woman!) has different taste. But the fact that it is garter stitch, on the bias, and fairly wide do put it more into traditional women's wear territory. You might want to check out our men's project gallery for more inspiration! http://www.purlbee.com/mens-knitting-projects/

Thank you!

Molly
July 16, 2014 | Registered Commenterpurl bee

PostPost a New Comment

Enter your information below to add a new comment.
Author Email (optional):
Author URL (optional):
Post:
 
All HTML will be escaped. Hyperlinks will be created for URLs automatically.