Search The Purl Bee
Sign up for our newsletter!

Idea Center
Follow The Purl Bee
« Molly's Sketchbook: Watercolor Quilt | Main | Whit's Knits: Stitch Block Cowl »
Sunday
Feb022014

Laura's Loop: The Boyfriend Hat

In Levis, flannel button downs, canvas sneakers, and grandpa cardigans, a friend of mine and I used to laugh that rather than dressing for the boys we wished we were dating, we dressed like the boys we wished we were dating. And the funniest part was that despite our different taste in men, somehow our fantasies of their wardrobes were identical. Some things are for the everyman and, as it turns out, for the everywoman too.

I designed the Boyfriend Hat with the versatility of any timeless article of clothing. Man or woman, wear it slouchy or cuffed. Pull it down taut or let it hover above the ears. Cuff it twice for a Wes Anderson style watchman cap.

Knit up with two different colored strands of Purl Soho’s Line Weight merino, the effect is gently marled and toasty warm. In a tight 1 x 1 rib, this hat is also exceptionally elastic and durable, hugging the head and feeling decadently soft, even through winter’s wear and tear.

The Boyfriend Hat is the hat you wish he had so you could steal it from him. Or is it the hat you have that he wants to steal from you? I don’t know… Just make two. -Laura

Materials

  • 2 skeins of Purl Soho's Line Weight, 100% merino. Yarn A: We used the color Heirloom White. Yarn B: We used the color Toasted Charcoal for the Women's Small and Oyster Gray for the Women's Medium/Men's Small.
  • A US #3, 16-inch circular needle
  • A set of US #3 double pointed needles
  • 4 stitch markers, 1 of which is a different color or type to indicate beginning of round

Gauge

9 3/4 stitches and 8 1/2 rows = 1 inch in 1 x 1 rib, unstretched

Sizes

Women's Small (Women's Medium/Men's Small, Women's Large/Men's Medium, Men's Large)
Finished Circumference: 14 3/4 (16 1/2, 18, 19 3/4) inches, un-stretched, comfortably stretching to approximately 19 3/4 (21 1/2, 23, 24 3/4) inches
Finished Height: 9 1/2 (9 3/4, 10, 10 1/4) inches

Pattern

Begin

With one strand of Yarn A and one strand of Yarn B, cast 144 (160, 176, 192) stitches onto the circular needle. Place marker and join for working in the round, being careful not to twist stitches.

Round 1: *K1, p1, repeat from * to end of round.

Repeat Round 1 until piece measures 8 inches from cast on edge.

Shape Top of Hat

NOTE: Switch to double pointed needles when necessary.

Set-Up Round: [Work 36 (40, 44, 48) stitches in established 1 x 1 rib pattern, place marker] three times, work in established pattern to end of round.

Round 1: *[K1, p1] four times, k1, k2tog, work in established pattern to 2 stitches before next marker, ssk, repeat from * to end of round. [8 stitches decreased] 

Round 2: *[K1, p1] four times, k1, p2tog, work in established pattern to 2 stitches before next marker, p2tog tbl, repeat from * to end of round. [8 stitches decreased]

Repeat Rounds 1 and 2 five (six, seven, eight) more times. [48 stitches]

Next Round: *Ssk, [k1, p1] two times, k1, k2tog, p1, k1, p1, repeat from * to end of round. [40 stitches]

Next Round: *Ssk, p1, k1, p1, k2tog, p1, k1, p1, repeat from * to end of round. [32 stitches]

Next Round: *Ssk, k1, k2tog, p1, k1, p1, repeat from * to end of round. [24 stitches]

Finish Hat

Cut yarns and thread them onto a tapestry needle. Draw the needle through the remaining stitches. Pull tight and bring tails to inside of hat to weave in.

Weave in remaining tails and block as desired.

Reader Comments (35)

What cast on did you choose for these samples, giving them such a nice edge?
February 2, 2014 | Unregistered CommenterKris Van Allen
Thanks for the great pattern. One question.. where instructions say to knit till piece measures 8 inches from cast on edge. Is this the same for all sizes? or is that just for the smallest size?
February 2, 2014 | Unregistered Commentersantaananana
These are lovely, simple hats. 'Would definitely work great for both genders!
I've found that Stephen West's Botanic Hat is also very popular with the dudes, if you want something with a bit more intricacy (color work, pattern, etc): http://westknits.com/index.php/pattern/hats/botanic-hat/
February 2, 2014 | Unregistered Commenteriris
Hello, I am new to your blog, but looking forward to reading more. I cannot knit, but I crochet, so I am in awe of your hats, they look great and nice and cosy for this time of year. xx
February 2, 2014 | Unregistered CommenterAmy at love made my home
A great ribbed hat! I love the simplicity and clean look of this hat and the two colors are great.
February 2, 2014 | Unregistered CommenterLizy Tish
I love this simple, adorable, classic looking hat!!! My only thought is does the pattern use all 2 skeins? Or can you get 2 hats out of the 2 skeins?

Thank you
Colleen
February 2, 2014 | Unregistered CommenterColleen
Hi Kris,
I used a cable cast on. We have a photo tutorial for a cable cast on. It shows a mid-row cable cast one, but the concept is the same. http://www.purlbee.com/knitting-tutorials-cast-ons/2008/7/7/cable-cast-on.html
Thanks.
Laura
February 3, 2014 | Registered Commenterpurl bee
Hi Santaananana,
Yes, all sizes knit until the piece measures 8 inches tall.

Because of the difference in the number of cast on stitches, the larger the size, the more decrease rounds, and therefore more height. But everyone does start the Shaping section of the pattern after working for 8 inches.

Glad you like the pattern. Let us know if you have any more questions.
Laura
February 3, 2014 | Registered Commenterpurl bee
this hat is a must!
just contemplating how other color combos would look?
February 3, 2014 | Unregistered Commentersusan k
Hi,
Beautiful pattern! I'm wondering if one could substitute a worsted-weight yarn instead of holding to fingering-weight yarns together?

Thanks!
Ivy
February 3, 2014 | Unregistered CommenterIvy
I have been dreaming of a simple, beautiful hat like this. Thank you for the wonderful pattern!
February 3, 2014 | Unregistered CommenterJessica
Hello...how many yards of yarn are needed for this hat?

Thanks! Mary
February 3, 2014 | Unregistered CommenterMary M
Hi,
I'm wondering how many hats you get from the two skeins.
Thanks! Looks like fun!!
February 4, 2014 | Unregistered CommenterPaula
Who wouldn't love this simple, unisex, hat! Can you suggest some other color combos? I'm thinking of using the two shades of gray, but open to guidance. Thanks
February 4, 2014 | Unregistered CommenterKatyj47
Hi Paula + Mary M + Colleen + et al...

The largest size hat uses approximately 460 yards of Purl Soho's Line Weight, this means that, with Purl Soho's Line Weight, you can get
- 1 single-color hat from 1 skein (pulling two strands of the same color)
OR
- 2 multi-color hats from 2 skeins (pulling one strand of each color yarn)

I will add this note to the pattern as well!
Thanks for asking and writing in.
Laura
February 4, 2014 | Registered Commenterpurl bee
Hi Ivy,
Thanks for writing in.
As for substituting a yarn, if you want to use a single strand of yarn, I think a DK weight yarn would be most similar in gauge. I would test any and all yarns you are considering using by swatching first of course. Worsted weight yarn seems a bit too thick or dense for the desired fabric.
Let us know how it goes!
Laura
February 4, 2014 | Registered Commenterpurl bee
Hi Katyj47,
Oh goodness, what a question! There are so many good combinations.
I love your idea of doing two grays together. For a more heathered look, I think that Oyster Gray + Storm Gray would be beautiful or Storm + Toasted Charcoal. Or, if you wanted higher contrast you could pull Oyster + Toasted Charcoal.
I of course also love the classic Heirloom White + Timeless Navy, but that's a whole different direction...
Laura
February 4, 2014 | Registered Commenterpurl bee
hi
Love your projects! this is just a suggestion. I have been making a lot of hats, and I find it very helpful to see a picture of the hat on someones head. Then I can really see the fit and style.
thank you!
February 4, 2014 | Unregistered CommenterDonna Ferrara
Love this hat. I have one skein of anzula squishy in my stash (385 yards) and would make the smallest size for myself. Could I get there in one skein holding two strands? It seems like it...thank you!
February 4, 2014 | Unregistered CommenterSarah
Hi Sarah,
Are you pulling one strand of Squishy or two strands of the Squishy. Squishy is actually quite a bit thicker than the Line Weight. If you knit it at the gauge suggested here, it may be too dense of a fabric for a comfortable and flexible hat. I would definitely make a swatch first. I have made hats from Squishy, it's wonderful. For one of my favorite hats I pulled one strand of Squishy and one strand of Jade Sapphire's 2Ply Cashmere. It was actually the prototype for these. Anyway...

That being said, if you are pulling two strands, my best guess is that you are going to be cutting it close, but I think you'll be fine. I thin your row gauge will be different from mine. Once you start working it up, if it seems to be taking more yarn than you expected, you can always knit it a 1/2 inch less before beginning the decreases, just to be on the safe side.

Thanks for writing in.
Let us know how it goes!
Laura
February 5, 2014 | Registered Commenterpurl bee
Lovely ! Can't wait to start knitting!
www.villagypsy.fr
February 6, 2014 | Unregistered Commentervillagypsy.fr
Hello ladies: I just finished my hat and perhaps my decreasing was off, but on the last three rounds I did the ssk ... k2tog decreases and then my sts after that were P1, K1, P1 in order to stay in pattern. Maybe I missed something, but I read my knitting like a good girl and knit P1, K1, P1 and it turned out fine. I'm curious to see if it happens again on my next version.

http://www.ravelry.com/projects/nomafighter/the-boyfriend-hat
February 11, 2014 | Unregistered CommenterMelissa
Hi Melissa,
I love the colors you used! Thanks for sharing the link to your hat. I have looked over the pattern a few times and I strongly believe it is correct. I am wondering if perhaps you began your decrease too soon or too late?

When decreasing before those last three rounds, you are decreasing along the edges of four sections of 9 stitches; never decreasing within the section of 9 stitches, only decreasing between the sections. In the last three rounds, the decreases are within those sections of 9 stitches. You ssk those first k1 and p1, and you k2tog the last p1, k1 and between the decreases, on the first round, you should have k1, p1, k1, p1, k1. On the second round, between the decreases, you should have between them, p1, k1, p1. On that last round you should have just a k1.

Please let us know how your second one goes! I'm thrilled you're making another.
Thanks again for writing in.
Laura
February 12, 2014 | Registered Commenterpurl bee
Hi, This hat is really cute! Is there a way to do one more decrease round that would not throw the pattern off. I hope to end up with twelve stitches to lessen the hole at the top of the hat.
Thanks so much !
February 14, 2014 | Unregistered CommenterAlice
OMG - you are aware that us knitting folk are endearing not just for our craft skills but also our superstitions? So the "boyfriend" hat is putting it right out there - never knit anything for a boyfriend, only for a husband....
February 15, 2014 | Unregistered CommenterLinda, Castlemaine Australia
Hi Alice,
If you wanted to do another round of decreases, after the last round of decreasing which leaves you with 24 stitches, then...
Next Round: *Sskp, k1, p1, k1, repeat from * to end of round. [16 stitches]

To sskp [slip slip knit pass]: slip two stitches together as if to knit, knit one, pass two slipped stitches over knit stitch and off needle; two stitch decrease
Let me know if you have any questions!
Laura
February 17, 2014 | Registered Commenterpurl bee
Linda!

I've heard of withholding sweater knitting until after your nuptials, but not knitting for your boyfriend at all?!?! I hope this is an Australian thing, if not I might be in trouble...

Laura
February 18, 2014 | Registered Commenterpurl bee
I love the classic look of these hats. I bet my husband would love to have one. I linked to this post on my weekly craft roundup on CraftsCrazy.
February 18, 2014 | Unregistered CommenterBethanny Parker
@katyj47 and @laura -- wouldn't Sea Salt be divine mixed with . . . . well, anything? Hard to tell from the website (need to come into the City for my Purl Soho fix, soon), but it looks wonderful. I've got Heirloom White and Toasted Charcoal on the needles now. God love the folks who can whip off a hat on Size 3's in a day or two. I'm not one of them. I would buy a few more colors, though, just because I LOVE the way it feels.
February 19, 2014 | Unregistered CommenterCatherine
I what wondering if I could get some tips as to how to pick out an appropriate substitute yarn for this pattern. I love love love this hat and am dying to make it, but I don't have access to your yarn. Thanks so much for posting this great pattern!
February 25, 2014 | Unregistered CommenterAmy
Hi Amy,
I'm happy to help you with substituting a yarn. The most important thing to look at is the gauge. It would be ideal if you could find a yarn that you can get 9 3/4 stitches to the inch in a 1 x 1 rib. And again, ideally, on a US3 or similar needle.

If you'd like to pull two strands I suggest a thin fingering or a lace weight yarn (like I used here). If you are pulling just one strand, I suggest looking at thick Sport Weight or a DK weight yarn.

I would stick with a sheep's wool rather than cashmere or alpaca. The natural elasticity in wool pairs wonderfully with the ribbing in the hat, providing extra stretch and hug.
Please write back if you have any questions at all!
Laura
February 27, 2014 | Registered Commenterpurl bee
Hi again Laura,
Ok. I'm finishing off my second hat and have come upon the same issue with the decreases. And I re-read our convo and I think my explanation was misunderstood. So, here's another try. After completing the sequence of the two repeated rows of decreases, when you are decreasing on either side of the 9 sts, you are left with 12 sts on each of your four dpns. It looks like this: (K, P, K, P, K, P, K, P, K) P, K, P. I'm using the parenthesis to show the 9 sts that are not worked on the initial decrease rows, and the remaining 3 sts are P, K, P because that last Row 2 of decreases is a p2tog and p2tbl decrease. Ok. So when you move on and work the final three rows of decreases, decreasing now inside those 9 previously non-worked sts, the last 3 sts, that now become the "non-worked" sts, are P, K, P. On your pattern they are listed as K, P, K. Sigh. I hope this makes sense. Either way, my final decrease rows worked out this way and, just as before, the hat came out awesome!
March 9, 2014 | Unregistered CommenterMelissa
Melissa!!!
Thank you so much for writing back in! You are totally absolutely completely correct. Those three stitches should be purl, knit, purl. I have edited the pattern and put a note on our Errata page too.

Thank you again for taking the time to share this with us/me! We really appreciate it. Plus, I love hearing you've worked the pattern multiple times.

Thanks Again,
Laura
March 14, 2014 | Registered Commenterpurl bee
I love your designs!!

wondering if you might have a suggestion for making this into a beanie instead of a slouchy hat. making it for a friend who prefers it that way and given how SLOW I am, I really don't want to mess it up!

thinking maybe to knit to 6 inches from edge and then just follow directions to decrease and finish?

thanks for your input!!
MJ
March 18, 2014 | Unregistered CommenterMJ Blanchette
Hi MJ,
Great question. 6-inches sounds like a good amount to work before beginning the decreases. The average adult head measures approximately 8.25 inches from the crown to the bottom of the earlobe. The average large adult head measures approximately 9.25 inches. You can use this and your row gauge and the number of rows of decreasing to figure out exactly how much ribbing to work...
Man's Medium
20 rows of decreasing / 8.5 rows to the inch (my row gauge) = 2.35 inches
8.25 (adult head height) - 2.35 inches (for decreasing) = approx 6 inches
Man's Large
22 rows of decreasing / 8.25 rows to the inch = 2.66 inches
9.25 (large adult head height) - 2.66 inches (for decreasing) = approx. 6.5 inches
I hope this helps!
Laura
March 19, 2014 | Registered Commenterpurl bee

PostPost a New Comment

Enter your information below to add a new comment.
Author Email (optional):
Author URL (optional):
Post:
 
All HTML will be escaped. Hyperlinks will be created for URLs automatically.