Molly's Sketchbook: Valentine's Friendship Bracelets
Last summer I not only conquered my childhood fear of making Friendship Bracelets, but I also developed a new appreciation for them. They're simple to make and cute as a can be, but most winningly, they really are great tokens of friendship. So cheerfully reminiscent of childhood and its open declarations of best-friends-forever, friendship bracelets are such a super way to let someone know you're thinking about them. All this adds up to the perfect Valentine's Day project! How sweet would it be to show up to work or school on February 14th with a bunch of these lovely little expressions of affection?
This time around I was a little more ambitious, creating adorable patterns of hearts and arrows, perfect for the holiday! Also, instead of traditional embroidery floss, I used Koigu Premium Merino Needlepoint Yarn, and I may never look back. Not only does this 100% merino wool come in a stunning array of hand-dyed colors, but its soft elasticity actually makes it easier to work with than the cotton. Plus, when you're done, you can press your bracelet so it lies totally flat with a beautiful drape.
Materials
To make 9 bracelets:
- an assortment of six Koigu Needlepoint yarns. I used colors, 1155, 0000, 1113, 1131, 2425, 2423
- a safety pin
- small scissors
- a blunt embroidery needle
If you've never made a macraméd friendship bracelet before please check out our original Friendship Bracelet post to learn how to make a left knot and a right knot.
Heart Bracelet
Cutting and Prep
You will need:
- 2 yarn colors: color A (the background color) and color B (the heart color)
- small scissors
- a safety pin
- a blunt embroidery needle to take out any mistakes.
Cut two 72-inch lengths of color A. Color A will be the ecru yarn in the pictures above.
Cut two 72-inch lengths of color B. Color B will be the pink yarn in the pictures above.
Gather all of the cut pieces together and fold them in half. Tie a simple overhand knot at the fold, leaving a 3/4-inch loop. You will now have 8 total strands, four of each color, originating from the top knot.
Using the safety pin, pin the knot to a flat surface or your jeans.
Arrange the threads in the following order: A, B, A, B, B, A, B, A as shown above.
Step 1
Starting at the left side and using the left most strand of color A tie a left knot.
Moving from left to right and using the same strand of color A tie two more left knots, for a total of 3 left knots.
Using the right most strand of color A make 4 right knots.
Step 2
Using the left most left strand of color A make a right knot.
Using the right most strand of color A make a left knot.
These two strands of color A will now be at the outer edges as shown above.
Step 3
Using the left most strand of color B make two left knots.
Using the right most strand of color B make three right knots.
Step 4
With the left most strand of color B make a right knot.
With the right most strand of color B make a left knot.
Step 5
With the left most strand of color A make 2 left knots.
With the right most strand of color A make 3 right knots.
Step6
With the left most strand of color B make three left knots.
With the right most strand of color B make four right knots.
You will now have your first heart shape.
Repeat steps 1-6 until your bracelet reaches the desired length.
Finishing
Cut the ends of the strands to be the same length. Braid the end into two equal braids or one braid (shown in the arrow bracelet example below.) Tie knots at the end of the braid(s)
Spray the bracelet with water and press it flat with a hot iron.
Arrow Bracelet
Cutting and Prep
You will need:
- 3 colors of yarn: color A (the background), color B (the arrowheads), and color C (the arrow body)
- small scissors
- a blunt embroidery needle
- a safety pin
Cutting and Prep
Cut three 72-inch lengths of color A. Color A will be the pink yarn in the pictures above.
Cut one 72-inch length of color B. Color B will be the ecru yarn in the pictures above.
Gather all of the cut pieces together and fold them in half. Tie a simple overhand knot at the fold, leaving a 3/4-inch loop. You will now have 8 total strands, four of each color, originating from the top knot.
Using the safety pin, pin the knot to a flat surface or your jeans.
Arrange the threads in the following order: A, A, A, B, B, A, A, A as pictured above.
Step 1
Starting at the left side and using the left most strand of Color A tie a left knot.
Moving from left to right and using the same strand of color A tie two more left knots, for a total of 3 left knots.
Using the right most strand of color A make 4 right knots.
Repeat these two rows two more times, until color B is on the outside as shown above.
Step 2
Using the left most strand of color A make a right knot.
Using the right most strand of color B make a left knot. These strands will now be on the outside, as shown in the picture above.
Step 3
With the left most strand of color B make two left knots.
With the right most strand of color B make three right knots.
Repeat steps 1-3 until your bracelet it the desired length.
Embroidering the Arrow Bodies
Cut a 20-inch length of color C and thread it onto the embroidery needle. Pull it through the top knot and from the back of the bracelet to just above the first arrow head as shown above.
Leave a 4-inch tail of color C and tie this tail to the top knot with a double knot.
Using a large running stitch embroider the arrow bodies above each of the arrow heads as shown above.
Embroider them all the way down the length of the bracelet.
At the end cut all of the yarn ends to the same length.
Make sure the top double knot of the color C tail is secure. Thread the tail through the embroidery needle and push it through the top knot once again then cut off the tail at the exit point to hide it.
Braid the end strands, tie them in a simple overhand knot and then trim the ends.
You're all done!
January 26, 2012
Reader Comments (15)
Thanks for sharing.
Thank you so much for bringing this to my attention so quickly! There was indeed a step missing I just fixed the pattern so it should be correct now.
Thanks again!
Molly
thanks!
Sorry to hear you're having trouble following the patterns. Putting the picture first is how we write all of our patterns. You might want to shrink your view so you can see the photo and the instructions at the same time. It also might be helpful to read the previous friendship bracelet post which can be found here: http://purlbee.squarespace.com/friendship-bracelets/ It explains things in more detail.
Hope this is helpful. Thanks for your comment.
Molly
Any further instruction would be appreciated.
Thank you for sharing the instructions.
You wear them by threading the braided end(s) though the top loop and tying a knot. Many times the knots are permanent and you just wear the bracelet until if falls off (or you cut it off). But if you finish it with the two braid option, shown on the heart example, you can tie a bow through the loop so the bracelet can be taken on and off.
I hope this helps. Thanks for your question.
Molly
Yes, the left and right knot always consist of 2 knots, in any friendship bracelet pattern that we post. The pictures in this post show where the threads need to be after each step. Is there a particular step you're having problems with?
If this is your first foray into macrame bracelets you might want to start with one of the easier bracelets from the previous post, like the stripes or chevron.
Thanks for your question and please do let us know if you need any more help.
Molly
I featured this tutorial on my Valentines edition of my weekly post "Five Fabulous Fings on Friday". You can have a peek here, if you wish :)
http://jesuisunemonstre.blogspot.com/2012/02/five-fabulous-fings-on-friday-be-my.html
Keep up the great work! Katie. xxxx
check out my blog-http://natureisflowers.blogspot.ca/